Use only in a well ventilated area. Avoid contact with skin & eyes. Do not swallow. Not to be taken.
Contact Bonding.
1. Ensure surfaces are clean and dry. If cutting laminate sheets, cut slightly oversize. Remove cap and carefully pierce foil seal.
2. Apply to both surfaces and spread evenly, ensuring surfaces are completely covered. Keep surfaces apart until adhesive is almost dry - approx 20 minutes, no more than 40 minutes.
3. Position items carefully, still keeping surfaces apart with dowels. When edges are perfectly aligned, remove dowels, and working from one edge, press surfaces firmly together. Grabs Immediately on contact.
4. Secure the bond by running a roller over the bonded surfaces from the centre outwards using a padded block. Maximum bond strength is reached after 24 hours. Clamping of warped or curled surfaces may be necessary.
Wet Bonding. (Small areas or porous surfaces).
1. Ensure the surfaces are clean and dry.
2. Apply KWIK GRIP to on surface, then bring the surfaces together and clamp until dry.
Coverage: Up to 0.25cm2 of one surface, depending on porosity.
Storage Instructions: Store in a cool place, below 40C