Filling the Water Tank:
1. Open the water tank cover, then pull the tank down to the marked line
2. Lay the flosser flat, face the opening towards the faucet and fill with cold or warm water or with mouthwash. You may use warm water up to 40C/104F.
3. After filling the tank with water close the cover firmly, and dry off any excess liquid.
Note: ensure that the tank cover is open before extending the device to open the water tank.
Using the Water Flosser:
1. Place the nozzle into your mouth before turning the device on.
2. Align the nozzle against your teeth and gum line.
3. Work the nozzle along the gumline, paying special attention to the area between teeth and around braces.
4. While flossing, open your mouth slightly to avoid water splashing.
5. Keep the flosser upright during use to prevent the tube in the tank from restricting water flow.
6. The water tank should allow for at least 50 seconds of flossing depending on the mode. Refill water tank as needed to floss between all teeth to complete your flossing session.