How to use:
Indoor Usage: Use only with Raid® Automatic Advanced Multi-Insect Control System dispenser. Quality of performance is only guaranteed with Raid® Automatic Advanced refills.
Read the instructions thoroughly before installing. Choose a location where the air circulates freely & where insects are likely to be. Air changes, building layout, temperature & humidity may affect unit's efficiency.
1. Confirm that dispenser is "off" by sliding switch to either '0' position.
2. Connect battery to terminal. Place battery into compartment.
3. Shake can well & then remove protective over-cap from can.
4. Place the dispenser on the Raid can.
5. Push down & twist the dispenser slightly until it stops & locks to the Raid can.
6. Lower the Raid can into the holder & press firmly to attach.
7. Hang product on wall or place on a horizontal surface, preferably 2 metres above floor & at least 30cm below ceiling.
8. For optimal results, keep unit in one consistent location within the home & allow unit to operate continuously without switching off.
To activate, ensure nozzle is pointing outwards & away from you.
2 dispenser settings available (12hr & 24hr) switch to either "12" or "24" position. The dispenser will activate 10 seconds after switching to the ON position. Your Raid' Automatic Advanced Multi-Insect Control System with Natural Pyrethrins now operates automatically releasing a spray every 7 minutes.
Lasts for up to 56 days on the 12 hr. setting.