For outdoor use only:
1. Your diffuser is only to be used in well ventilated, sheltered outdoor areas only when mosquitoes and flies are prevalent. Place the diffuser at least 2m high from the ground and not closer than 300mm from the roof of any outdoor structure, always facing an open area (refer to wall mounting guide). To maintain the lifetime of the diffuser unit, install out of the rain and direct sunlight.
2. Ensure the external switch is in the off position and open the diffuser by pressing the button on the top and pulling the front cover forward.
3. Insert 2 x AA batteries. Ensure the batteries are correctly inserted by aligning the positive (+) and negative (-) terminals.
4. Insert the refill can in the diffuser unit, with the nozzle facing outwards. Now change the switch to the 20 or 40 seconds release setting. The choice of release setting is dependent on your outdoor environment and time of day. The 20 second setting is recommended for large areas, windy days and when flies are most prevalent. The 40 second setting is recommended for small areas, calm days and when mosquitoes are most prevalent.
5. Close the front cover and switch the external switch to the on position.
6. When activated, a flashing green light indicates that the device is working, followed by a delay of 20 seconds or 40 seconds depending on the setting (and then every 20 or 40 seconds after that).
7. The diffuser unit will automatically turn off after 3 hours of continuous use to minimise wastage. To reset, switch to off and then back to on.
8. If there is no green light, check the batteries are inserted correctly. If it fails to spray, please read the trouble-shooting directions batteries need to be replaced when the green light stops flashing or when the diffuser stops spraying.
Not to be used for any purpose, or in any manner, contrary to this label unless authorised.
Storage Instructions: Store indoors when not in use.
