Important: Please keep for future reference when refilling.
1. Choose where you want to mount your diffuser. Recommended rooms include lounge & family rooms, away from immediate food preparation & children activity & pet sleeping areas. Mount the diffuser at least 2m above the floor and not closer than 300mm from the ceiling facing an open area (refer to wall mounting guide).
2. To open the diffuser, depress the button on the back of the device and pull the front cover forward.
3. Ensure the dial is in the Off position. Insert 2 x AA batteries. Ensure the batteries are correctly inserted by aligning the positive (+) and negative (-) terminals.
4. Insert the refill can, with the nozzle facing outwards and close the device. Now change the dial from Off to your desired time setting. When activated, the device will spray after a delay of 15 seconds. If there is no spray after 15 seconds, switch off the device and check steps 2 and 3 have been performed correctly before repeating steps 4.
5. If it fails to spray, please read the Trouble-Shooting directions.
6. When the aerosol refill is nearly empty the red light will flash rapidly and the device will soon stop spraying. Directing the device away from the face, turn the dial to the off position and replace the refill as directed above.
Not to be used for any purpose, or in any manner, contrary to this label unless authorised.
Storage Instructions: Pressurised dispenser. Protect from sunlight and do not expose can to temperatures exceeding 50°C, such as may occur in cars, or near heat sources such as heaters, stoves, or open flames. Do not incinerate or puncture this can, even when empty. Aerosols should be completely empty before disposing. Recycle empty cans if a facility is available or place can in household rubbish.